How to create a beveled edge with wood planers

Are you planning to create a beveled edge for your wood panel? But unfortunately, your table saw is broken. So you don’t know how to solve this problem. Why not try using your power planer? You are doubting my suggestion, are you? I’m not joking with you. You can use a power saw to create bevel edges without having to use any other woodworking tool.

So, how to create a bevel angle with a power planer? I don’t take much of your time anymore. Find out now.

What is a power planer

The power wood planer is one of the most used devices for carpenters. Besides the capacity of making the rough wood panels smooth and flat as the devices. The power planer can also smooth out the grain of the wood and create angled wood boards.

Especially, the device is also equipped with many outstanding functions. Like there is a depth adjustment knob so you can adjust the cutting force easily. In particular, the parts of the device can be disassembled simply if you want to clean or wash.

How to create a beveled edge by  using a power planer

Step 1: Prepare

Prepare

Prepare

Before you start your planing job, make sure you wear safe clothes and the right type of safety equipment. First, you should wear a pair of safety goggles to protect you from dust and prevent wood chips from getting into your eyes. Next, you need to wear clothes that fit you that are not too long to avoid getting pulled into the blade of the planer. That is extremely dangerous and scary.

Note: Many people think that wearing gloves is a necessity to avoid getting your hand sucked into the planer. That statement is completely wrong. Wearing gloves is not only unnecessary but also makes you more dangerous. Because wearing gloves is quite entangled it makes your planning process difficult and inflexible. When problems occur you will not respond promptly and quickly.

Step 2: Fix your wooden board

Before planing, make sure your board is secured in place. If your board is not rigidly fixed, it can be shaken or moved from position making your planning process awkward and challenging. Therefore, That is extremely important because any small mistake will affect the outcome and quality of your wood.

To secure the wood panel firmly, you can use wooden clip or vise to fix the edges. If you want the wood to be firmer, protect the wood by placing two shortcuts between the wood you want to plan and the clip.

Many wooden planks are moldy that you cannot see. Therefore, to check the quality of wood before handling, The best method is to get the best moisture meter that useful and necessary for every carpenter.

Step 3: Start with the first cut

After preparing, now is the time to embark on the first cutting process. First, connect your power planer plug into the socket to be ready to cut. Then, adjust the depth of the cut line that you want (on the handle of the machine). Next, embark on the plan, Highlight the edge where you want to cut the bevel. Please plan a straight line of wood and follow the line you marked. And pay attention to hold both ends of the planing device to plan the most stable and reliable. After making a turn, return to the starting point.

Step 4: Make more cuts

To create the bevel edge clearer. You need to cut in several more times. Repeat the procedure from step 3. You should also note that all cuts must be in the same direction and each cut must be in constant motion. Moreover, do not stop while in the process, you will lose accuracy. Your bevel edge will not be perfect.

Cut about 5 to 6 times until you find your bevel angle is best and according to your desire.

Step 5:  Finish

After planing on the bevel edge you require, now use sandpaper to make the bevel edge smooth and flat. After that, you should wipe the wood with a fabric or soft towel to remove any remaining dust. Repeat this process for all the edges where you want to create the bevel angle. When you’re done, turn off the planer and unplug it from the electrical outlet.

In conclusion

To create a perfect bevel edge not everyone can do, especially difficult for beginners. If you are new, you should train cutting straight much to master first with the best wood planer. After that, use the power planer to practice cutting the bevel edge.  Have you found the article useful? I hope that the knowledge I have provided is helpful to you. And thank you for taking the time to read the entire article.

Leave a Comment: